INSTRUCTIONS
FOR OSC #400 SERIES ACRYLIC LECTERNS
(MODELS
#401, #401S, & #471 and #410)
Congratulations!
You have purchased a high quality acrylic plexiglass podium that should
give you many years of professional, long lasting use.
This series lectern is manufactured from ½” & 3/8” polished
acrylic by American craftsmen in the
USA
.
How
to Care for your Acrylic Lectern:
-
DO NOT CLEAN WITH WINDEX OR ANY OTHER PRODUCT CONTAINING AMMONIA.
MILD SOAP AND A SOFT SPONGE OR CHAMOIS IS RECOMMENDED ONLY
AS A WAY
TO TRANSPORT WATER TO THE
ACRYLIC. USE YOUR BARE HAND TO REMOVE ANY DIRT OR DEBRIS.
DRY WITH A CLEAN, DAMP CHAMOIS.
-
DO
NOT OVERTIGHTEN THE SCREWS ON THE BASE AND
READING
SURFACE.
THE ACRYLIC MAY CRACK.
-
DO
NOT LEAN HEAVILY ON THE
READING
SURFACE WHEN SPEAKING.
-
WHEN
MOVING YOUR ACRYLIC LECTERN, IT IS BEST THAT YOU USE A DOLLY AND WRAP THE
LECTERN WITH A PADDED CLOTH.
-
DO
NOT PULL FROM THE
READING
SURFACE OR DRAG ACROSS A
WOODEN OR CARPETED FLOOR AS THIS MAY CAUSE SPIDERING OR CRACKING AROUND
THE CONNECTION POINTS.
Parts:
| Middle Column |
1 |
| Reading
Surface |
1 |
| Base
|
1 |
| Shelf |
(Model
401S only) |
| Screws |
8
( 4 for the base and 4 for the reading surface)
|
Directions:
-
Place parts on a clean,
protected surface such as carpet or the like.
-
Place
main column on base and align the base with the pre-drilled holes.
-
Screw
in the 4 screws provided gently in the pre-drilled holes on the base and
lift the column.
-
Place
the reading surface on top of the column and screw in the 4 screws provided
gently guiding them in the pre-drilled holes.
If
you require further assistance, please call Customer Service at 973-594-9000 or
fax your request at 973-594-9339