Instructions for OSC WM-190TC
Lavaliere Wireless System

 

Congratulations!  You have purchased a high quality lavaliere, tie clip style, wireless system, which when operated properly, should give years of quality sound reproduction.

WM-190TC Specifications

Transmitter:

Receiver:  

Receiving Frequency:  F1 171.105 MHZ
F2 171.845 MHZ
Reception System: FM Super heterodyne
Reception Sens: 6db for 20db S/N
Power Source:    006.DE (6F22) 9V x 1
Battery Life:   6 hours Nominal
Power Consumption: 40mA
Controls: Power switch, Channel selector
LED indicator: Power ON  
Dimension:   104mm(H) x 62mm(W) x 24mm(D)
Weight:    130g (with batteries)

OPERATING INSTRUCTIONS  

Please follow these steps for operation.

1.) Open battery section of both the receiver and transmitter and install one 9V battery in each.  Close by sliding covers back on.

2.) Plug one end of the connector cable (black wire with 1/8” jacks on each end) into the audio input on the Receiver.  Plug the other end into the mic input on your sound system.

3.) Assemble lavaliere mic by connecting the provided clip to the microphone, and plug it into the mic input on the Transmitter.

4.) Clip the mic onto your tie, collar, etc, and the Transmitter onto your belt, or in your pocket, etc.

5.) Turn on the power, on both the Receiver and Transmitter, making sure both are set to matching channels, either A or B.

6.) Turn your sound system on, and enjoy the crisp clear sound.